RRP
Kinda Superbikey
2012 KLX140L
Clear title, my name and transferable.
Stock motor just refreshed 6/24/26 by WFO Motorsports
C5 concepts full exhaust
TBpart Shiney engine bits
Drilled and safety wired, Pro bolt caliper and oil filter pre drilled bolt kit
Galfer SS front brake line
Brand new TBparts front brake rotor
New eBay specials brake rotors on all other wheels
New OEM chain/sprockets
Full aftermarket suspension for big boys - 250lbs
-TWF cartridge kit with BBR heavy springs built by Zoran himself
-Hornet fully adjustable shock, massaged,valved and sprung by DMr suspension
73 Motorsports 17” SM wheels 2.5” front 3.5” rear
Buchanan 17” wheels with never used rains -
2.75” front and rear
Stock L wheels 19” and 16” also included
Proper swingarm spool mounts installed with Woodcraft sliders
Tall seat
1” bar risers
New YCR Bellypan just installed
Spares:
New set Bstone moto3 slicks still in wrapper
73Motoparts tire warmers
Pitbull TRS setup with pins (hens teeth finding these pins - had PB make this set)
Front stand, under tree with proper custom pin fitted (had this made so front stand would work properly and modded front SM fender)
Rear spool stand
Keihn 28mm flatslide and new MP throttle cable for it
NIB sintered front brake pads
Spare levers - brake, clutch, shifter
Spare OEM forks with Racetech Gold valve emulator kit and BBR heavy springs
Everything for Big bore kit, all you need is a cylinder
Big bore piston new with rings
BRI After market cam with cam bearings
Oversize valves
OEM head complete to machine for big valves
TK Racing carb (28mm)
OEM shock
OEM exhaust
Factory service manual
Any other odds and ends I find
$5000 FIRM for everything. Located 62439 southern Illinois
A lot here and really you won’t need anything else to take it racing.
I’m not parting it out and not in a rush to sell it.
I will take out the new Bstone slicks and Pitbull TRS and knock $500 off the lot price. Only adjustment I'm prepared to make at this point.
NOTE: Please don’t muck up my ad with what YOU think it’s worth.
If you’re interested, reach out to me- if not - don’t.
I am willing to help with delivery as much as I can.
Clear title, my name and transferable.
Stock motor just refreshed 6/24/26 by WFO Motorsports
C5 concepts full exhaust
TBpart Shiney engine bits
Drilled and safety wired, Pro bolt caliper and oil filter pre drilled bolt kit
Galfer SS front brake line
Brand new TBparts front brake rotor
New eBay specials brake rotors on all other wheels
New OEM chain/sprockets
Full aftermarket suspension for big boys - 250lbs
-TWF cartridge kit with BBR heavy springs built by Zoran himself
-Hornet fully adjustable shock, massaged,valved and sprung by DMr suspension
73 Motorsports 17” SM wheels 2.5” front 3.5” rear
Buchanan 17” wheels with never used rains -
2.75” front and rear
Stock L wheels 19” and 16” also included
Proper swingarm spool mounts installed with Woodcraft sliders
Tall seat
1” bar risers
New YCR Bellypan just installed
Spares:
New set Bstone moto3 slicks still in wrapper
73Motoparts tire warmers
Pitbull TRS setup with pins (hens teeth finding these pins - had PB make this set)
Front stand, under tree with proper custom pin fitted (had this made so front stand would work properly and modded front SM fender)
Rear spool stand
Keihn 28mm flatslide and new MP throttle cable for it
NIB sintered front brake pads
Spare levers - brake, clutch, shifter
Spare OEM forks with Racetech Gold valve emulator kit and BBR heavy springs
Everything for Big bore kit, all you need is a cylinder
Big bore piston new with rings
BRI After market cam with cam bearings
Oversize valves
OEM head complete to machine for big valves
TK Racing carb (28mm)
OEM shock
OEM exhaust
Factory service manual
Any other odds and ends I find
$5000 FIRM for everything. Located 62439 southern Illinois
A lot here and really you won’t need anything else to take it racing.
I’m not parting it out and not in a rush to sell it.
I will take out the new Bstone slicks and Pitbull TRS and knock $500 off the lot price. Only adjustment I'm prepared to make at this point.
NOTE: Please don’t muck up my ad with what YOU think it’s worth.
If you’re interested, reach out to me- if not - don’t.
I am willing to help with delivery as much as I can.
